Area is cleaned of debris, break is glued, clamped and left for minimum of 1 week. Break area is refinished, guitar tested.
From £100
Truss rod breaks aren't unheard of. Usually it's from over tightning the truss rod nut.
Most breaks occur at the nut end, we can solve this by opening out a small area at the top of the channel and recutting a thread on the broken rod.
If you are attempting to tighten the truss rod and it feels tight/stiff stop what you're doing and contact us!!!
If your truss rod nut is tight and the neck is still bowed we can force the neck into a back bow and adjust accordingly, saving any potential breaks.
£35
New thread cut into existing rod, includes set up.
POA
Acoustic guitars can develop a problem known as "bellying". This causes the bridge to lift and the top to develop a belly. It effects the intonation and action of the guitar. Atmospherics can be the cause as well as age and constant pressure from the string tension.
To cure this we steam the bridge off of the guitar and heat specially desinged metal cauls that clamp onto the bridge area and bridge plate.
The heat reduces the belly and solves the issue. The bridge is then reglued and the guitar is set up.
To reinforce the work we can perminantly install a bracing clamp that will prevent further issues.
This repair isn't an over night job so be prepared to be without the guitar for a while.
Bridge removed, top heated, bridge re glued, area finished (if required) guitar set up
£150 (excluding strings)
Same as de bely but with JLD bridge doctor fitted
POA
If you can not see what you require please feel free to contact us.